Portal Industrial Cartagena Colombia - Forum - Contacts

Restart the Network:
One of the most basic troubleshooting of issues like Belkin Router keeps disconnecting is restarting your entire network. To restart the network, first, turn off the router, disconnect all the cables attached to the modem, router, and your computer, if any. Wait for about two minutes and then reconnect all the cables to their respective slots. Finally check if the Belkin Router won’t connect issue is resolved. Alternatively, you can perform Belkin Router update and restart the network as discussed.

Use Ethernet Cable:
Plug one end of an Ethernet cable to the LAN port of the router and the other end to the LAN port of your computer.
Now open a web browser on your computer and browse the default IP of your Belkin Router (192.168.2.1).
On the router login screen, enter the router login credentials and press Enter. If you aren’t able to log into the router, reset Windows TCP/IP settings by following the steps listed below:
Press “Windows+R” keys together to open the Run dialog box.
Type “cmd” in the Run dialog box and select “Run as Administrator” to open the command prompt.
Type “netsh int ip reset c:
esetlog.txt” and press Enter.
Reboot your computer when prompted.
Check the WiFi Security Settings:
If your Belkin Router not connecting to internet, you might need to check the WiFi security settings on the router. To start with, click on the “Encryption” option, located under the “Wireless” tab on the left-hand panel. The two types of encryption methods used by Belkin Routers are Wired Equivalent Privacy and Wi-Fi Protected Access, abbreviated for WEP and WPA respectively. In addition, ensure that the Belkin Router setup is properly done.

Reset the Router:
To resolve the issue of Belkin Router won’t connect to internet, you can reset the router. If you don’t know how to reset Belkin Router, first, locate the reset button of the router. Usually it is located at either side of the router. Insert a pointed object into the reset port and hold on for about 10 seconds. You will notice that the Belkin Router wireless light off and the router reboots.

Update the Router Firmware:
Ensuring the presence of updated Belkin Router firmware is essential. An outdated router firmware can often lead to issues like Belkin Router slow, can’t connect to Belkin Router, etc. Here’s the step-by-step process to update the firmware of a Belkin Router:

Open a web browser on your computer
Browse the router IP address, i.e., 192.168.2.1 for Belkin Router login
Click on Update after selecting the firmware file
Click on “yes” to continue with the firmware upgrade
Once the update completes, you will be prompted to wait for a few seconds for the changes to take effect.



Hope you find this helpful.
Regards,
Jake Paul.